dddrop 3D printers
Magigoo PA Suture Pen
Magigoo PA Suture Pen
Regular price
€21,95 EUR
Regular price
Sale price
€21,95 EUR
Unit price
per
Shipping calculated at checkout.
Prices are excl. VAT.
Couldn't load pickup availability
For optimal printing results, a 3D print must adhere well to the 3D printer bed. With MAGIGOO you apply an adhesive layer to your printer bed. This prevents deformation of print parts (warping). MAGIGOO PA has been developed for professional use, to be used exclusively with polyamide (PA) filaments. MAGIGOO PA works well for the dddrop filament PA-12 and Novamid® ID 1030 CF10.
Instructions
• Shake the bottle.
• Apply the liquid by pressing the pen tip onto the printer bed. Tip: For larger prints, a 20mm border is recommended.
• Then print the model with the dddrop print settings.
• Allow the model to cool and remove it from the printer bed.
• Clean the printer bed with the dddrop cleaner and you are ready for the next print.
Please note: Using this product with other filaments (PA type) may cause excessive adhesion and damage your 3D model.
In cases of excessive adhesion, it is advisable to wet the printer bed with a small amount of water, this can help make removal of the part easier.
Instructions
• Shake the bottle.
• Apply the liquid by pressing the pen tip onto the printer bed. Tip: For larger prints, a 20mm border is recommended.
• Then print the model with the dddrop print settings.
• Allow the model to cool and remove it from the printer bed.
• Clean the printer bed with the dddrop cleaner and you are ready for the next print.
Please note: Using this product with other filaments (PA type) may cause excessive adhesion and damage your 3D model.
In cases of excessive adhesion, it is advisable to wet the printer bed with a small amount of water, this can help make removal of the part easier.
